starmh.blogg.se - august 2023

A function has been added that automatically sets the HLG signal system gamma according to the contrast value.

"False Color" display and operability have been improved, by adding HDR area and SDR area brightness boundary settings and enabling color-coding of SDR areas using two different colors.

The HDR signal area can be colored with the same color as that used for "False Color", and areas that are in the HDR range or higher can be colored with a warning color. In addition, the HDR/SDR ratio and the peak and average brightness can be displayed.

The brightness signal histogram of the input video can now be displayed.

The peak and average brightness values and time codes obtained by the "Frame Luminance Monitor" can now be output to USB memory.

"Luminance Graph" display (which uses gradations to express the brightness distribution within the maximum brightness) and "HDR/SDR Ratio Graph" display (which expresses the brightness ratio of HDR areas and SDR areas) have been added to the "Frame Luminance Monitor".

A setting has been added that switches terminal order sorting ON and OFF according to the Payload ID when inputting a 2-Sample Interleave/3G-SDI Dual Link signal.

When inputting 8K video (2-Sample Interleave signal) with four 12G-SDI cables, it is now possible to sequentially switch and display the video of each input terminal at regular intervals, and to display a warning when the video signal of a non-displayed terminal is incorrect.

Warning display is available for SDI signal CRC errors.

Warning display is available for input signal errors such as no signal or unsupported signal and for incorrect 2-Sample Interleave signal connection order.Settings can now be exported and imported between multiple different models when connected to the same LAN.The picture quality and channel settings of multiple displays connected via a LAN can now be switched simultaneously.Display picture quality settings are automatically detected and switched by Transfer Characteristics (PQ/HLG/SDR), Bit Depth, and ICtCp of the Payload ID.Four different LUTs can be viewed simultaneously in QuadView display mode.SDR video picture quality settings (contrast adjustment, color temperature, gain adjustment) have been added in HDR/SDR comparison display mode.Waveform monitors of HDR video and SDR video can now be simultaneously displayed and the waveform monitors after LUT conversion can now be displayed in "Compare View" mode.The video display position can now be adjusted using "Top", "Middle" and "Center" in 2-picture or 4-picture display mode."Wave Form Monitor" and "Vector Scope" can now be simultaneously displayed within the screen.

The audio level meter of multiple terminals can now be simultaneously displayed *2 in 2-picture or 4-picture display mode.2-picture or 4-picture display *1 of 12G/6G-SDI 4K video signals and 3G/HD-SDI 2K video signals can now be performed with a single display.Firmware Version 1.3 incorporates the following improvements: